Descripción del usuario

2: If the camera's batteries ran down completely while its lens was still open, the digital camera may show a lens error or not begin correctly when new batteries are installed. Remove the memory card and keep it eliminated, then install the brand new batteries. While you flip the digicam on with the card eliminated it might come again to life, as this triggers a reset in some cameras. 3: Insert the cameras Audio/Video (AV) cable, and switch the camera on. Inserting this cable ensures that the camera's LCD display remains off during the start course of. Thus further battery power is offered to the camera's lens motor throughout startup. This additional energy can be helpful in overcoming grit or sand particals which may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider holding this cable put in while trying fixes 4, 5, and 7 as a method to offer additional power to assist to these fixes. But word that I don't suggest protecting the cable installed during Repair 6 as you could damage the AV port while tapping the digital camera. Reinsert the cable solely AFTER tapping the camera. 4: Place the digicam flat on its again on a table, pointed on the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The concept is that the digicam will try to autofocus whereas the lens is extending, hopefully seating the lens barrel guide pins back into their slots. 5: Blow compressed air within the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Different variations embrace blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (cautious with this one). Some people even have really used a "Shop Vac" with this fix to help lengthen a retracted lens.

If you liked this post and you would like to obtain much more information about www.plurk.com kindly go to our own site.